INS-B-OEM
The INS-B-OEM utilises advanced single antenna GNSS receiver, barometer, 3-axes each of calibrated in full operational temperature range Advanced MEMS Accelerometers and Gyroscopes to provide accurate Position, Velocity, Heading, Pitch and Roll of the device under measure. INS-B-OEM contains Inertial Labs new on-board sensors fusion filter, state of the art navigation and guidance algorithms and calibration software.
MEMS, Tactical grade IMU
Position, Heading, Pitch, Roll, Velocity and Orientation
GPS, GLONASS, GALILEO, BEIDOU, SBAS, DGPS, RTK supported signals
Small size & light weight: 85mm x 47mm x 36mm, 115g
INS-P-OEM
The INS-P-OEM is the OEM version of Inertial Labs’ new generation, fully-integrated, combined GPS, GLONASS, GALILEO, QZSS, NAVIC and BEIDOU GNSS and high-performance strapdown system, that determines position, velocity and absolute orientation for any device it is mounted on.
Tactical grade IMU
Position, Heading, Pitch, Roll, Velocity
Embedded gyro compensated Fluxgate compass
Small size & light weight: 85mm x 47mm x 45mm, 125g
INS-DL-OEM
Dual Antenna, GPS-Aided Inertial Navigation System. The INS-DL-OEM is the OEM version of new generation, dual GNSS antenna, fully-integrated, combined GPS, GLONASS, GALILEO and BEIDOU GNSS and high-performance strapdown system, determining position, velocity and absolute position (Heading, Pitch and Roll) for any device on which it is mounted.
MEMS, Tactical grade IMU
Dual Antenna Heading, Pitch & Roll for motionless & dynamic applications
Compatible with LIDAR, Optical camera
Small size, light weight
INS-DU-OEM
Dual Antenna, GPS-Aided Inertial Navigation System utilising MiniAHRS.
MEMS, Industrial grade IMU
Dual Antenna Heading, Pitch & Roll for motionless & dynamic applications
Internal Mini-FG magnetic compass
Low-cost integrated land vehicle navigation applications
INS-DH-OEM
Dual Antenna, GPS-Aided Inertial Navigation System. The INS-DH-OEM utilises an advanced dual antenna receiver, a Honeywell HG4930 IMU which has 3-axes each of calibrated in full operational temperature range advanced MEMS Accelerometers and new generation of tactical grade MEMS Gyroscopes to provide accurate Position, Velocity, Heading, Pitch and Roll of the device under measure.
MEMS, Tactical grade IMU
Dual Antenna Heading, Pitch & Roll for motionless & dynamic applications
Compatible with LIDAR, Optical camera
Small size, light weight: 85.5mm x 67.5mm x 52mm, 280gm
INS-U-OEM
Multi frequency and Multi constellations GNSS Receiver. The INS-U-OEM utilises advanced single antenna GNSS receiver, two barometers, magnetometers, 3-axes each of calibrated in full operational temperature range Advanced MEMS Accelerometers and Gyroscopes to provide accurate Position, Velocity, Heading, Pitch and Roll of the device under measure.
MEMS IMU
Position, Velocity, Heading, Pitch & Roll
Compatible with LIDAR, Optical camera
Small size, light weight, low power
INS-D-OEM
Dual Antenna, GPS-Aided Inertial Navigation System. The INS-D-OEM is the OEM version of new generation, dual GNSS antenna, fully-integrated, combined GPS, GLONASS, GALILEO and BEIDOU GNSS and high-performance strapdown system, determining position, velocity and absolute position (Heading, Pitch and Roll) for any device on which it is mounted.
MEMS, Tactical grade IMU
Dual Antenna Heading, Pitch & Roll for motionless & dynamic applications
Compatible with LIDAR, Optical camera
Small size, light weight
INS-BU-OEM
Single Antenna, GPS-Aided Inertial Navigation System for marine, land and aerial applications.
MEMS IMU
Horizontal & Vertical Positions, Heading, Pitch & Roll
1cm RTK Position
Remote sensing, real time UAV scanning, aerial surveying
